Afree John

If your Swann DVR's HDD light isn't flashing, it's usually a detection issue. First, check the power supply—ensure the adapter matches the DVR's voltage and inspect cables for damage. Verify that the HDD's SATA or IDE connections are secure. Test the hard drive on another device to rule out failures. Update the DVR firmware using … Read more

If your Swann DVR isn't powering up, start by checking the power adapter. Confirm it's properly connected and matches the DVR's output rating. Plug it into a known-good wall outlet and see if the DVR's LEDs light up. Test the power adapter with another compatible device if unsure. Also, verify the connections and try a … Read more

If your CCTV camera isn't working, a power supply issue is often the culprit. Power surges, overloading, short circuits, and overheating can all disrupt functionality. First, check if the voltage and current match the camera's requirements. Use a multimeter to test the power output. Inspect for any burnt components or physical damage. Verify all cables … Read more

If your Swann DVR menu isn't working, start by power cycling the DVR and checking all connections. Try using both the front panel and remote control. Make sure the DVR is compatible with your monitor's resolution. Update the firmware if available. For 4 and 8 channel models, hold down the REWIND or 0 button; for … Read more

If you're encountering video loss on your Swann NVR, begin by checking error messages like No Signal or Signal Out of Range. Confirm all Ethernet cables are securely connected with a click and make sure the LEDs on PoE ports are lit. Access the NVR Menu to examine the IP camera table for connectivity. Isolate … Read more

To factory reset your Night Owl DVR/NVR without a password or email, first make sure the system is powered off. Locate and hold the reset button on the device, then unplug and plug back the power while still holding the button for 15-30 seconds. Release the button and allow the device to restart. The system … Read more

If playback on your Swann camera isn't functioning on your iPhone, start by checking if your device firmware is up to date. Verify that your network connection is stable and try rebooting your camera, modem, and router. Review your Swann Security app settings, including motion detection sensitivity. Confirm that your hard drive and local storage … Read more

If your Swann playback isn't working on Android, start by updating your DVR/NVR firmware and SwannView Link app. Confirm your network connection is stable and reboot your devices, including your camera, router, and Android phone. Check for recording interruptions by adjusting motion settings and verifying date/time accuracy. Also, clear the Swann app cache or reinstall … Read more

If your Swann Security app's live view isn't working, first make sure you have a stable internet connection. Verify the Wi-Fi signal and restart your router. Keep the app updated to benefit from the latest bug fixes and improvements. Power cycle your devices by restarting both your cameras and mobile phone. Check and grant necessary … Read more

To stop IR reflection, keep dome covers clean with a soft cloth and mild solution—it minimizes obstructive grime. Position your cameras strategically, avoiding reflective surfaces like rain gutters. Adjust IR settings, using Smart IR mode and cut filters, to enhance illumination. Consider external IR illuminators placed away from reflectors. Invest in IR cameras with advanced … Read more