If you're encountering video loss on your Swann NVR, begin by checking error messages like No Signal or Signal Out of Range. Confirm all Ethernet cables are securely connected with a click and make sure the LEDs on PoE ports…
To factory reset your Night Owl DVR/NVR without a password or email, first make sure the system is powered off. Locate and hold the reset button on the device, then unplug and plug back the power while still holding the…
If playback on your Swann camera isn't functioning on your iPhone, start by checking if your device firmware is up to date. Verify that your network connection is stable and try rebooting your camera, modem, and router. Review your Swann…
If your Swann playback isn't working on Android, start by updating your DVR/NVR firmware and SwannView Link app. Confirm your network connection is stable and reboot your devices, including your camera, router, and Android phone. Check for recording interruptions by…
If your Swann Security app's live view isn't working, first make sure you have a stable internet connection. Verify the Wi-Fi signal and restart your router. Keep the app updated to benefit from the latest bug fixes and improvements. Power…
To stop IR reflection, keep dome covers clean with a soft cloth and mild solution—it minimizes obstructive grime. Position your cameras strategically, avoiding reflective surfaces like rain gutters. Adjust IR settings, using Smart IR mode and cut filters, to enhance…
Night vision cameras emit infrared (IR) light, which is invisible to the naked eye. This IR light allows the cameras to capture clear images in complete darkness. The IR illuminators emit light at wavelengths beyond the visible spectrum, ensuring minimal…
To disable your infrared camera, first access the camera settings menu, usually located under 'Night Vision' or 'Illuminator'. Turn off the IR lights in all profiles and save your adjustments. If your camera has a web interface, enter its IP…
If your Night Owl DVR isn't working, start by checking the power source and LED status. Confirm the DVR is plugged directly into a wall outlet and the power adapter is functioning. Network issues? Inspect the Ethernet cable and reset…
